Antec Performance 1 FT ARGB (E-ATX) Full Tower Cabinet (Black)

Features:
Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUinity software must be installed.
ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.
I/O Panel
Including the mainstream Type-C(10Gbps) port for high-speed transfer.
Included dust plugs for dust prevention.
Mic/Audio 2-in-1 port.
4mm tempered glass & perforated solid steel
Left panel adopts tempered glass for better PC showcase visual effects. Right solid panel is bottom-perforated to enhance heat dissipation and ventilation.
Cable Management on Point
Spacious cable management for efficient wire organization.
There are ten sets of velcro straps for easy cable management.
Three sets of velcro straps for fan & I/O cable routing.
Five velcro straps for hardware and power supply cables.
Two velcro straps at the rear for rear I/O cable routing.
Exquisite craftsmanship
Minimal clearance between fan frame and blades, achieving maximum operational efficiency.
Vibration-Absorbing & Anti-Noise Pads
Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
Best Airflow Path for GPU Cooling
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom and bottom-right side, and the availability of fans installed on the meshed PSU shroud together provide the best performance for the GPU cooling.
Top: Magnetic dust filter
Front: Magnetic & clip-on dust filter
Bottom: Full-sized pull-out dust filter
Side: Magnetic dust filter
Supports RTX 40 Series Graphics Cards
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
Best Cooling Design
Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
Supports 360mm radiators at the front and top simultaneously.
Up to 10 fans simultaneously.
Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5″ HDD/2.5″ SSD & 3 drive trays for 2.5″ SSD.
Specification:
Model Performance 1 FT ARGB
Color Black
Dimensions 522 x 230 x 522 mm (DWH)
Form Factor Full Tower
Materials Steel + Plastic + Glass
Mainboard Support E-ATX, ATX, Micro-ATX, ITX
Front Access & Controls Power, Reset , USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1
Side Panel 4mm Tempered Glass(Both Sides)
Drive Bays
Expansion Slots 8
3.5″ / 2.5″ 2/2
2.5″ 3
Fan Support
Front 3 x 120mm / 3 X 140mm
Top 3 x 120mm / 3 x 140mm
Power Supply Shroud 3 x 120mm
Rear 1 x 120mm
Included Fan(s) 3 x 140 x 30mm PWM fans in front + 1 x 120 x 30mm PWM fan in rear
Pre-installed Storm T3 PWM fan specs vary from the retail version
Radiator Support
Front 120 / 140 / 240 / 280 / 360 / 420mm
Top 120 / 140 / 240 / 280 / 360mm
Rear 120mm
Clearance
Max GPU Length ≤ 400mm
Max CPU Cooler Height ≤ 175mm
Max PSU Length (Include cable) ≤ 245mm(with HDD)
(Include cable) ≤ 440mm(without HDD)
Miscellaneous
Dust Filter Front / Top / Bottom / Right Side
Net Weight 13.04Kg
Gross Weight 15.26Kg
Warranty
2 Years
Note
*** Features, Price, Specifications are subject to change without notice.